ART045 Electric Scissor Lift Table

This Electric Lift Cart ay isang matipid portable electric lift table sa mga gulong na isang maginhawang solusyon sa maraming sitwasyon sa paghawak ng materyal. Ang Ang talahanayan ng electric lift Ang ES serye ay dinisenyo para sa pagpili ng pagkakasunud-sunod, mamatay paghawak, pagpupulong o kahit saan nakakataas ay kinakailangan. Mahalaga ang paglalagay ng load sa tamang taas mula sa 495-1618mm.

Mga uri ng Maggupit Lift Table

Electric Lift Table Electric Scissor Lift Table Mobile Lift Table Manual Lift Table Manu-manong Table Lifter Portable Lift Table.

Mga Tampok:

• Malakas na istraktura pa liwanag timbang.
• Ang dalawang preno ay nagtataas ng kaligtasan.
• Power unit na ginawa sa Europa DC 800W.
• Mataas na kalidad ng baterya, Single maggupit 54Ah / 12V; Double maggupit 80Ah / 12V.
• Awtomatikong charger ng baterya.

 

Modelo		ART045	ART046	ART047	ART048
I-load ang Kapasidad	Kg (lb)	300(660)	500(1100)	300(660)	500(1100)
Sukat ng Table (L * W)	mm (pulgada)	1010*520(40*20)
Table Taas Min / Max	mm (pulgada)	450/950(19.5/37.4)		495/1600 (20/63)	495/1618 (20/64)
Ang Pagtaas ng Ikot Lubos na Naka-charge	mm (pulgada)	65	55	45	40
Wheel Dia.	mm (pulgada)	Ø150 (6)
Pag-aangat / pagbaba ng oras	mm (pulgada)	15/15
Pangkalahatang sukat	mm (pulgada)	520*1230(20*50.2)
Pagpapadala ng timbang	Kg (lb)	140(308)	148(326)	183(403)	198(436)

Serbisyo ng pagbebenta pagkatapos ng pagbebenta:

1. Ang bawat kagamitan ay may pagtuturo sa pagtutuos.
2. 1 Taon Limited Warranty (Hindi kasama ang mga magagamit na accessories / mga bahagi).
3. Professional after-sales service personnel.
4. Sinusuportahan ang mga kasangkapang pantaw.

Attention and Maintenance:

1. Charge the charger for more than 12 hours when it is used for the first time. Check whether the electrical connectors of the electric lifting platform are loose when charging. If the electric connector of the electric lifting platform is loose, it should be tightened and then recharged.
2. Check the parts of the electric lifting platform for deformation and bending;
3. Check if the brakes of the electric lifting platform are malfunctioning and the wear of the wheels of the electric lifting platform;
4. Check the hydraulic system of the electric lifting platform for oil leakage;
5. Check the high-pressure fuel pipe of the electric lifting platform for damage. If is damaged, it should be replaced in time. Or the rupture in using will cause a major danger;
6. Fill the friction surfaces with lubricating oil before using the electric lifting platform every day;
7. Recharge in time after using the electric lifting platform every day;
8. If the electric lifting table is faulty, it should be repaired before use;
9. Replace the hydraulic oil of the mobile table every 12 months, and select the correct hydraulic oil according to the climatic conditions of different regions;

Q&A:

Q: What about product warranty?

A: We offer 1 year limited warranty for most of our products and we can provide free accessories and professional engineers will assist you with repairs or we can provide repair videos for your reference.

Q: What is the speed of rise from lowered to max height?

A: The lift time is approximately 20 seconds from lowered height to the maximum height under full load (1100 lbs.)

Q: How many hours of continuous use do you get between charges?

A: The battery charge is based on usage not time. The lift cycle per charge is 40 elevations.

Common Failure and Solutions:

（一）The lift table is weak or unable to lift

Reasons and elimination methods:

1. Cause: overload

Elimination method: reduce the load can be eliminated

2. Reason: the oil return valve is not closed

Elimination method: tighten the return oil valve can be eliminated

3. Reason: the one-way valve of the manual pump is stuck and fails

Elimination method: unscrew the oil pump valve port bolt, overhaul, clean, replace clean hydraulic oil can be eliminated

4. reason: manual pump, gear pump serious oil leakage

Elimination method: replace the oil pump seal ring can be eliminated

5. reason: gear pump damage, hit the oil without pressure

Elimination method: replace gear pump can be eliminated

6. Reason: insufficient hydraulic oil

Elimination method: add enough hydraulic oil to eliminate

7. Reason: circuit break

Exclusion method: check the button contactor and fuse can be excluded

8. Reason: clogged filter

Elimination method: replacement or cleaning can be eliminated

9. reason: support valve or electromagnetic reversing valve action failure, there are two cases: A, electromagnetic coil input voltage is less than 220V.B. solenoid coil burns out c. valve core is stuck

Elimination method: maintenance or replacement can be eliminated

（二）The lifting platform drops naturally

Causes and elimination methods

1. Reason: one-way valve discharge

Exclusion method: check the one-way valve in the valve group.If there is dirt on the sealing surface of the one-way valve. Clean check valve.

2. Reason: the descending valve is not tightly closed

Elimination method: check whether there is electricity in the descending valve, if there is no electricity, remove the fault of the descending valve itself or replace the descending valve.The slide valve of the descending valve must be kept clean and movable.

3. Cause: leakage in the oil cylinder

Elimination method: replace cylinder seal

（三）The lifting platform does not descend

1. Reason: the descending valve fails

Elimination method: in the case of pressing the drop button, check whether the drop valve has electricity.If there is no electricity, try to eliminate it.If there is electricity, remove the falling valve itself fault, or replace the falling valve.The slide valve should be kept clean and lubricated.

2. Reason: the descending speed control valve is out of balance

Elimination method: adjust the control valve of falling speed, if the adjustment is invalid, replace the new valve.

 

Electric Scissor Lift Tabletagagawa:

Bilang isang propesyonal na tagagawa ng iba't ibang uri ng materyal na paghawak at pag-aangkat ng mga produkto, maggupit ng talahanayan ng pag-angatay isa sa aming mga pangunahing produkto. Bilang karagdagan sa mga ito, maaari din namin ang paggawa ng iba't ibang mga uri ng mga trak papag, stackers, mga talahanayan ng pag-angat, forklift, kreyn at iba pa. Kung nais mong bilhin ito  mobile etalahanayan ng mga lectric lift, maaari kang magpadala sa amin ng email o sa iba pang mga paraan na nakalista sa pahina.

Kaugnay na Mga Produkto